YASKAWA JANCD-YBB02 I/O base board
JANCD-YBB02 is an I/O base board for Yaskawa CNC control system. It serves as the signal carrier connecting main control board and external peripheral signals, providing reliable terminal expansion for machine tool auxiliary signals.
Description
Product Brief
JANCD-YBB02 is an I/O base board for Yaskawa CNC control system. It serves as the signal carrier connecting main control board and external peripheral signals, providing reliable terminal expansion for machine tool auxiliary signals.
Model Definition
JANCD: General circuit board prefix of Yaskawa CNC controller;YBB: External I/O signal base board series;02: Second generation standard hardware version.
Technical Parameters
Operating voltage DC24V for signal circuit, low power consumption design. Supports digital input and output signal transmission, withstands industrial instantaneous voltage surge. Operating temperature 0–55℃, storage temperature -20–85℃, cabinet internal installation, protection grade IP10, built-in noise suppression circuit.
Interface and Communication Configuration
Internal backplane bus connector realizes high-speed data communication with main control processor board. Multiple row terminal blocks are reserved externally for connecting limit switches, tool sensors, cooling pumps and alarm devices. LED indicator lights correspond to each channel to display input and output signal status in real time.
Core Functions
Converts and distributes digital switching signals between CNC mainboard and machine tool peripherals. Supports multi-channel auxiliary function signal transmission including spindle control, door interlock and lubrication system. Real-time signal fault detection such as short circuit and open circuit, outputs alarm feedback to main control unit.
Application Scenarios
Matched with Yaskawa CNC systems for lathes, milling machines and small machining centers. Used in mold processing equipment, precision cutting machinery and automated numerical control workstations to expand machine tool auxiliary I/O signals.
Operation and Maintenance Instructions
Disconnect the total power supply and wait 10 minutes for capacitor discharge before disassembly or wiring. Keep the control cabinet dry and ventilated to avoid metal debris, oil mist and dust covering the circuit board. Regularly check terminal blocks for loose wiring or oxidation. Clean surface dust with dry compressed air every three months, replace the board if continuous signal channel failure occurs.
Get a Quote