Model Definition

DDS03.2: DIAX03 system servo drive series (firmware v3.x)

W: Internal cabinet air cooling

030: 30 A continuous current, 60 A peak current

BE12: Enhanced B12 (SERCOS interface + safety I/O, Function ID 12)

01: Hardware revision 01

FW: Factory-integrated firmware module (DSM02.3-FW, FWA-DIAX03-SSE-02VRS)

Technical Specifications

Electrical Parameters

DC bus voltage: 300 V DC ±15% (powered by TVD/TVM supplies)

Control supply: 24 V DC (20–28 V DC)

Continuous output current: 30 A

Peak output current: 60 A (short-term)

Current loop: 125 μs

Speed loop: 500 μs

Position loop: 2 ms

Power dissipation: ~120 W (@30 A)

Compatible motors: MDD/MKD synchronous, LAR/LAF linear, 2AD series

Mechanical & Environmental

Cooling: Internal air blower + heatsink

Protection class: IP20 (front), IP10 (overall)

Operating temperature: 0 °C to +45 °C (20% derating @55 °C)

Storage temperature: -30 °C to +85 °C

Max altitude: 1000 m (35% derating above)

Dimensions (W×H×D): 60 mm × 408 mm × 180 mm

Weight: ~5.5 kg

Interface and Communication Configuration

Motor feedback: X4 interface (digital servo encoder + resolver, dual-channel)

System bus: Shared 300 V DC bus for multi-axis parallel connection

Communication: BE12 = B12 + safety (SERCOS via DSS02.1M in U1 slot; EN 13849-1 Cat.3 PL d / EN 62061 SIL 2)

Digital I/O: 6 isolated inputs / 3 isolated outputs (including safety-related signals)

Service port: RS232 (IndraWorks setup/diagnostics)

Firmware: U5 slot with DSM02.3-FW (factory-loaded, no separate firmware card needed)

Core Functions

Three-loop control (current/speed/position) for high precision

BE12: Pre-configured SERCOS + safety I/O (reduces integration effort)

Internal cooling saves cabinet space for dense multi-axis layouts

Comprehensive protection: over/undervoltage, overcurrent, short circuit, overheat, feedback loss

Torque/speed/position control modes

Modular design for easy maintenance/upgrades

FW suffix: plug-and-play deployment (no firmware loading required)

Application Scenarios

Medium-power CNC machine axes (with safety requirements)

Textile/printing/packaging machinery (multi-axis sync + safety)

Automated assembly lines & handling robots (SIL2/Cat.3 safety)

Automation requiring SERCOS real-time communication + safety

DIAX03 system upgrades with pre-configured firmware and safety I/O

Usage and Maintenance

Ensure unobstructed cabinet airflow (maintain cooling efficiency)

Keep ambient ≤45 °C to avoid performance derating

Complete power/feedback/control wiring before power-on

Configure via IndraWorks (match motor/load parameters)

Clean air passages/heatsinks every 6 months; inspect terminals

Calibrate control loops/feedback annually for stability