Model Definition

DKC: ECODRIVE series drive controller

01.3: Hardware platform version (DKC01.3 family)

012: Rated continuous output current (12 A RMS)

3: Low voltage class (300 V DC nominal bus)

MGP: Multi-Interface General Purpose firmware

01VRS: Firmware version 01, standard variant

Technical Specifications

Electrical Parameters

Input voltage: 3-phase 200–240 V AC, 50/60 Hz

Continuous output current: 12 A

Peak output current: 24 A (2× overload)

DC bus nominal voltage: 300 V DC

Control supply: 24 V DC ±20%

Compatible motors: MSM030C (400 W), MSM040B (750 W), MKD/MKE series synchronous servo motors

Max output frequency: 1000 Hz

Mechanical & Environmental Parameters

Dimensions (W×H×D): 100 mm × 350 mm × 250 mm

Weight: Approx. 5.0 kg

Operating temperature: 0 °C to +45 °C

Storage temperature: -25 °C to +85 °C

Protection class: IP20

Cooling: Internal forced-air cooling (vertical mounting required)

Interface and Communication Configuration

Motor feedback: Incremental encoder (standard); absolute encoder (optional)

Digital I/O: 24 V DC inputs/outputs (enable, fault, limit, reference)

Control interfaces: Analog (±10 V) / pulse command (standard)

Communication: RS232/485 (standard); PROFIBUS DP, CANopen (optional expansion cards)

Diagnostics: 7-segment display + LED status indicators

Position blocks: 32 via I/O; 64 via serial communication

Core Functions

Torque, speed, and position control modes

2× overload capacity for dynamic acceleration/deceleration

Factory-preloaded MGP-01VRS firmware for multi-interface general motion tasks

Built-in homing, jog, and point-to-point positioning

Comprehensive protection: overvoltage, undervoltage, overcurrent, overtemperature, short circuit

Regenerative power capability

Application Scenarios

Medium-power CNC machine tools (auxiliary axes)

Packaging, printing, and textile machinery

Automated assembly lines and material handling systems

200–240 V AC industrial automation environments

Retrofit of legacy Indramat DKC01.3 systems

Usage and Maintenance

Mount vertically with ≥80 mm bottom clearance and ≥150 mm top clearance for airflow

Verify input voltage matches drive rating before power-on

Use shielded cables for motor/encoder wiring; separate from power cables

Clean cooling fans/filters every 3–6 months (dusty environments)

Check terminal connections quarterly for tightness

Commission via IndraWorks/DriveTop software with preloaded MGP-01VRS firmware