Model Definition

DKC: ECODRIVE series drive controller

01.3: Hardware platform (Type 3, analog/parallel interface)

040: Rated continuous output current (40 A RMS)

7: High voltage class (700 V DC nominal bus, 380–480 V AC input)

FW: Firmware-version unit (application firmware ordered separately)

Technical Specifications

Electrical Parameters

Input voltage: 3-phase 380–480 V AC, 50/60 Hz

Continuous output current: 40 A

Peak output current: 80 A (2× overload capacity)

DC bus nominal voltage: 700 V DC

Control supply: 24 V DC ±20%, 21 W

Compatible motors: MKD/MSK/MHD series synchronous servo motors (5–7.5 kW)

Max output frequency: 1000 Hz

Max output voltage: 800 V

Mechanical & Environmental Parameters

Dimensions (W×H×D): 80 mm × 410 mm × 250 mm

Weight: Approx. 5.1 kg

Operating temperature: 0 °C to +45 °C (nominal); up to +55 °C (derated)

Storage temperature: -25 °C to +85 °C

Protection class: IP20

Cooling: Internal forced-air cooling (vertical mounting required)

Interface and Communication Configuration

Motor feedback: Incremental encoder (standard); absolute encoder (optional)

Digital I/O: 24 V DC inputs/outputs (enable, fault, limit, reference)

Control interfaces: Analog (±10 V) / pulse command (standard)

Communication: RS232/485 (standard); PROFIBUS DP, CANopen (optional cards)

Diagnostics: 7-segment display + LED status indicators

Position blocks: 32 via I/O; 64 via serial communication

Core Functions

Torque, speed, and position control modes

2× overload capacity for high dynamic acceleration/deceleration

FW firmware structure (requires separate application firmware)

Built-in homing, jog, and point-to-point positioning

Comprehensive protection: overvoltage, undervoltage, overcurrent, overtemperature, short circuit

Regenerative power capability (supports braking resistors)

Application Scenarios

High-power CNC machine tools (main axes)

Heavy-duty packaging, printing, and textile machinery

Automated assembly lines with high payloads

Material handling systems (conveyors, cranes)

380–480 V AC industrial automation environments

Retrofit of legacy Indramat DKC01.3 high-voltage systems

Usage and Maintenance

Mount vertically with ≥80 mm bottom clearance and ≥150 mm top clearance for airflow

Verify input voltage matches 380–480 V AC rating before power-on

Use shielded cables for motor/encoder wiring; separate from power cables

Clean cooling fans/filters every 3–6 months (dusty environments)

Check terminal connections quarterly for tightness

Commission via IndraWorks/DriveTop software with specified FW firmware