ABB CP430T-ETH is a 5.7-inch color touchscreen HMI from the CP400 series, featuring a TFT display, analog resistive touch, and built-in Ethernet port. Designed for industrial automation, it provides real-time visualization, local operation, and network connectivity for ABB and third-party controllers. The unit offers high shock/vibration resistance, wide temperature tolerance, and IP65 front-panel protection for harsh environments.

CP = Control Panel; 430 = 5.7-inch form factor in CP400 series; T = Touchscreen (no physical function keys); ETH = Equipped with Ethernet interface.

Display: 5.7-inch color TFT, 64K colors, 320×240 pixels. Touch: analog resistive, glove-operable. Processor: 32-bit RISC. Memory: 4 MB flash, 16 MB RAM, 512 KB battery-backed RAM. Power: 24 V DC ±10%, typical <0.5 A. Environment: 0 °C to +50 °C operating, -10 °C to +60 °C storage, 20%–90% RH non-condensing. Protection: front IP65/NEMA 4X, rear IP20. Weight: approx. 0.86 kg. Real-time clock: lithium battery backed.

Ethernet: 10/100 Mbps RJ45, supports Modbus TCP, TCP/IP. Serial: two ports (RS232/RS422/RS485), Modbus RTU. USB: 1×USB 1.1 for program upload/download and data storage. Configuration software: CP400 Soft.

Real-time data display and touchscreen operation. Customizable graphical screens, alarm management, data logging, recipe management. Multi-language support and 9-level password protection. Reliable data exchange with PLCs, drives, and controllers. Offline simulation and online debugging. Ethernet-enabled remote monitoring and system integration.

Manufacturing: machine tools, packaging, assembly lines. Process: water treatment, food and beverage, pharmaceuticals. Building automation: HVAC, energy management. Material handling: conveyors, small automated cells. Plastics, textile, and printing machinery.

Install into control cabinet cutout with proper sealing to maintain IP65. Use shielded cables for communication; separate power and signal wiring. Verify power polarity and protection before power-on. Design projects and set parameters via CP400 Soft. Clean touchscreen with mild detergent; avoid corrosives. Periodically inspect cables/terminals for looseness or damage. Back up projects regularly; update firmware as needed. Observe anti-static measures; avoid strong vibration and direct sunlight.