Schneider 140CPU67261 Hot Standby Unity CPU Module
Description
140CPU67261
Modicon Quantum Unity Hot Standby Processor
266 MHz, 3072 kB (3 MB) RAM, Single‑Mode Fiber Ethernet, Standard Coating, 2‑Slot
1. General Information
Part Number: 140CPU67261
Manufacturer: Schneider Electric
Series: Modicon Quantum (Unity Pro XL)
Type: 32‑bit PowerPC RISC, 266 MHz, with FPU
On‑board RAM: 3072 kB (3 MB) (1536 kB dedicated data area)
Flash Memory: 4 MB (firmware/backup)
Front Panel: Standard (no LCD/keypad)
Coating: Standard (non‑conformal)
Slot Occupancy: 2 slots (double width)
Software: Unity Pro XL (redundancy enabled)
Status: Discontinued (EOL)
Hot‑Swappable: Yes
Key Difference from 67260: Single‑mode fiber (vs multimode) for long‑distance HSBY
Primary Use: High‑end Hot Standby, large programs, long‑distance fiber redundancy
2. Performance
Boolean Logic: ~10.28 K instructions/ms
Mixed Logic: ~10.07 K instructions/ms
Floating‑point: Supported (on‑board FPU)
3. Memory & Expansion
Internal RAM: 3072 kB (3 MB)
PCMCIA (2 slots):
Program memory: up to 7 MB
File storage: up to 8 MB
Backup: 3 V lithium battery (≈10 years)
RTC: Integrated, battery‑backed
4. I/O Capacity
Distributed Digital I/O: 8,000 In / 8,000 Out (MB+)
Remote I/O (max): 31,744 points
Distributed Stations: 63 (Modbus Plus)
Remote Stations: 31 (per RIO bus)
Local Expansion Racks: up to 2
5. Communications (Integrated)
1 × Modbus Plus (MB+): D‑Sub 9, 1 Mbps
1 × Single‑Mode Fiber Ethernet (SC): 100 Mbps, Modbus TCP/IP, up to 20 km, dedicated HSBY sync
1 × Modbus RTU (RS‑232/485): D‑Sub 9, ASCII/RTU
1 × USB 1.1: Programming & data logging
Expansion Slots: 6 (Ethernet, Profibus DP, etc.)
6. Key Features
3 MB RAM: Largest standard Quantum HSBY CPU
Single‑mode fiber: Long‑distance redundant link (up to 20 km)
Double slot: Higher power, better cooling for large programs
FPU included: Complex process control math
High‑density HSBY: Fast sync, large data mirroring
7. Electrical
Backplane Current: 2.76 A @ 5.1 VDC
Power Consumption: ~14 W
8. Environmental
Operating Temp: 0 °C to +60 °C
Storage Temp: −40 °C to +85 °C
Humidity: 5–95% RH, non‑condensing
Altitude: 5,000 m
9. Certifications
10. Model Differences (Quantum HSBY Fiber CPU)
140CPU67261: 3 MB, single‑mode fiber, standard coating, 2‑slot
140CPU67261C: 3 MB, single‑mode fiber, conformal coated, 2‑slot
140CPU67260: 3 MB, multimode fiber, standard coating, 2‑slot
140CPU67260C: 3 MB, multimode fiber, conformal coated, 2‑slot
140CPU67160S: 1 MB, multimode fiber, LCD/keypad red, 2‑slot
Get a Quote