Schneider 140CPU67861C Conformal Coated Hot Standby Unity CPU
Description
140CPU67861C
Modicon Quantum Unity Hot Standby Processor
266 MHz, 11 MB RAM, Single‑Mode Fiber Ethernet, Conformal Coated, 2‑Slot
General Information
Part Number: 140CPU67861C
Manufacturer: Schneider Electric
Series: Modicon Quantum (Unity Pro XL)
CPU Core: 32‑bit PowerPC RISC, 266 MHz, with FPU
On‑board RAM: 11264 kB (11 MB) (1536 kB dedicated data area)
Flash Memory: 4 MB (firmware/backup)
Coating: Conformal Coated (Humiseal 1A33) – harsh/corrosive environments
Slot Occupancy: 2 slots (double width)
Software: Unity Pro XL (redundancy enabled)
Status: Discontinued (EOL)
Hot‑Swappable: Yes
Key Difference from 140CPU67861: Conformal coated (vs standard coating)
Primary Use: Large programs, high‑end Hot Standby, long‑distance fiber, harsh sites
Performance
Boolean Logic: ~10.28 K instructions/ms
Mixed Logic: ~10.07 K instructions/ms
Floating‑point: Supported (on‑board FPU)
System Overhead: 1 ms (master task), 0.2 ms (fast task)
Memory & Expansion
Internal RAM: 11264 kB (11 MB)
PCMCIA (2 slots):
Program memory: up to 7 MB
File storage: up to 8 MB
Backup: 3 V lithium battery (≈10 years)
RTC: Integrated, battery‑backed
I/O Capacity
Distributed Digital I/O: 8,000 In / 8,000 Out (MB+)
Remote I/O (max): 31,744 points (In/Out)
Distributed Stations: 63 (Modbus Plus)
Remote Stations: 31 (per RIO/Ethernet bus)
Local Expansion Racks: up to 2
Integrated Communications
1 × Modbus Plus (MB+): D‑Sub 9, 1 Mbps
1 × Single‑Mode Fiber Ethernet: 100 Mbps, max 20 km
1 × Modbus RTU RS232/485: Serial port
1 × USB: Programming interface
Electrical
Backplane Current: 2.8 A @ 5.1 VDC
Power Consumption: 14.3 W
Environmental
Operating Temp: 0 °C ~ +60 °C
Storage Temp: −40 °C ~ +85 °C
Humidity: 5%–95% non‑condensing
Altitude: up to 5,000 m
Certifications
Model Comparison
140CPU67861: 11 MB RAM, single‑mode fiber, standard coating
140CPU67861C: 11 MB RAM, single‑mode fiber, conformal coated
140CPU67261: 3 MB RAM, single‑mode fiber, standard coating
Get a Quote